Přejít k hlavní navigaci

MDF BOARDS

Characteristics and use

The MDF is the medium compressed fibreboard with almost homogenous structure. It is used mainly there where the edges or profiles must be profiled. The surface is usually finished by laminating, backing or varnishing.

 

Technical parameters

Format: 2800 x 2070 mm
Thickness: 6, 8, 10, 12, 16, 18, 19, 22, 25, 28, 30, 32, 35, 38, 40, (44, 50, 60 mm - min. order quantity 100m3)
(possibility of lamination from 8 to 38mm)

 

MDF one-side laminated

Format: 2800 x 2070 mm
Thickness: 16/18/19/22 mm

 

 

Property Testing method Requirement
Tolerance for thickness STN EN 324-1 ± 0,3 mm
Tolerance for dimensions STN EN 324-1 ± 5,0 mm
Tolerance for rectangularity STN EN 324-2 ± 2 mm / m
Moisture STN EN 322 4 % – 11 %
Formaldehyde leakage STN EN 120 < 8 mg / 100 g samples
Thickness area   > 6      >19      >12      >19      >30
< 9      <12      <19      <30      <45
Bending stregth STN EN 310 (MPa) 23        22        20        18        17
Tensile strength STN EN 319 (MPa) 0,65     0,60      0,55     0,55    0,50
Swelling after 24 hours STN EN 317 17        15        12        10         8
Modulus of elasticity STN EN 310 (MPa) 2800    2500     2200     2150   1900

 

Gallery